Paper recycling ( English Version )

So ... 
One way to reduce the use of paper is to recycle paper. Here's how to recycle paper. 

Recycled Paper 

Purpose 
Knowing how to recycle paper 

Tools and Materials 
1.Baskom (vessel) 
2.Paper Scissor
3.Iron 
4.Blender 
5.Rounded shaped wood frame with the terms of the four-size 15 x 20 cm 
6.Wood frame with the same size (15 x 20 cm) and given screen (mosquito netting or net bentos) 
7. Fabric or thick plastic overlay for the table 
8.Spons or a thick, dry foam 
9.Fabric that had used or the thick plastic 
10.Aquades
11. Paper’s glue  from the tapioca (starch glue) 
12. Unused paper such as newspaper, HVS, or paper gift 

How it works 
1.Torn paper may be small and then soaked in a basin. Make sure all the paper is completely submerged. 
2. After paper have been soaked for 1 day, tatters again soaked paper in it. If the type of thick paper such as cardboard, soaking is done for 2 days. For soaking the paper up to 24 hours, must often be the replacement of water, at least 6 hours to avoid the aroma of rotten paper and sting the nose. 
3. Destroy the soaked paper or destroyed it with a blender to make paper pulp. If using a blender, 1 cup soaked paper added with 2 glasses of water is entered into the blender. Do not fill glass blender more than half. Level of refinement pulp depending on the object will be created
4. Take the pulp which has been soaked as much as 250 grams of water, mixed with ten grams of starch glue and five liters of water in a basin or tub and poke to the average. If you want to produce recycled paper that is thin, the amount of water plus 1 liter again, otherwise if you want to recycle the paper thick 2 liters of water was reduced.
5. The process of printing paper using a 2 helping wood frame with an empty frame position located above, while the frame of the screen is located under the wood frame which is empty. However, the position of the screen should be facing upwards.

 6. Poke the dough in the pulp basin / tub, then soak the wood frame soon to the bucket, then lift to the surface.

 7. Leave mold frame a while over a bucket so that the remnants of water in the basin will to / vessel. After about 15 seconds the top of the frame can be taken carefully until there is only the frame on the screen. On the screen the pulp will obtained dough that is still rough.
8. Move the frame that contains a mix of paper to the table that had been coated fabric or thick plastic. Flip the frame’s position, make the pulp’s position touching the dough and stick to the cloth or plastic that has been inserted in the table directly, while the screen is at the top.
9. With thick and dry sponge or foam, do water suction on the screen repeatedly. Next, the screen frame can be lifted carefully than will be left out the dough on the paper or plastic cloth.  
10. Next, do the drying under the blazing sun until it has dried.
11. To get the paper tight and rigid, re-heating can be done with ironing the papers one by one.
12. Recycled paper can be made for party decorations or stationery that has a value selling.  
13. Create works of art from recycled paper and trying to sell it to your friends or neighbors.  


(Taken from Esis biology book 1^st grade)